{"id":1326,"date":"2008-03-03T20:58:42","date_gmt":"2008-03-04T03:58:42","guid":{"rendered":"http:\/\/gillin.com\/blog\/?p=1326"},"modified":"2009-10-24T11:59:27","modified_gmt":"2009-10-24T18:59:27","slug":"tips-for-a-greener-%e2%80%93-and-cheaper-%e2%80%93-data-center","status":"publish","type":"post","link":"https:\/\/gillin.com\/blog\/2008\/03\/tips-for-a-greener-%e2%80%93-and-cheaper-%e2%80%93-data-center\/","title":{"rendered":"Tips For a Greener \u2013 And Cheaper \u2013 Data Center"},"content":{"rendered":"

From Innovations, a website published by Ziff-Davis Enterprise from mid-2006 to mid-2009. Reprinted by permission.<\/em><\/p>\n

The EPA estimates that data centers eat up about 1.5% of all electricity in the United States and that nearly a quarter of that power is wasted.<\/p>\n

As I noted last week, energy waste is one of the dirty little secrets of corporate data centers<\/a>.\u00a0 Add on to that the money lost due to PCs sitting idle overnight and the waste inherent in abandoned and underutilized servers and you have a lot of money just sitting out there waiting to be found.<\/p>\n

Energy-saving is mostly a matter of common sense.\u00a0 \u00a0The simplest approach may be to start, literally, at the ground floor.\u00a0 If you peer under the raised flooring in your data center, you’ll probably find pockets of cables clustered together. These could be inhibiting air flow.\u00a0 By re-cabling and deploying vented floor tiles in strategic locations, you can cut energy waste with almost zero capital expense.\u00a0 Many consultants now specialize in this area, and bringing in an expert can save time and money in the long run. This article tells the story of one company that saved him $1 million annually in power costs through this simple measure<\/a>.<\/p>\n

The next step is to analyze your server use to determining what can be shut down and consolidated.\u00a0 One speaker at last fall’s Data Center World conference proposed a radical idea<\/a>: if you don’t know who’s using a server, shut it down. Mark Monroe, Sun Microsystems\u2019 director of sustainable computing, said that his group tried this approach and discovered that nearly 12% of its servers weren’t being used for anything.\u00a0 The application owners had moved on and no one had bothered to shut down the application.<\/p>\n

Consolidate the servers you\u2019re using into one location and direct your cooling resources to that hotspot.\u00a0 Use virtualization to pack more physical servers onto fewer virtual ones.\u00a0 By some estimates, about 70% of servers in the data center are only supporting one application.\u00a0 Utilization rates of less than 15% on single servers are not uncommon. These are ideal candidates for virtualization.<\/p>\n

Air conditioning is responsible for the greatest energy waste.\u00a0 The problem is that most data center managers don’t know where all their hotspots are, so they take a brute force approach and cool the entire data center to a certain level. The reality is that the hottest servers probably consume a minority of floor space.<\/p>\n

While high-density servers can consume less power overall than the individual machines they replace, there’s no reason to structure your cooling plan around the needs of maybe 10% of your hardware. Several vendors now sell server racks that are optimized for cooling.\u00a0 Also, the water cooling technique that was common in the mainframe days two decades ago is staging a revival as server consolidation comes back into vogue.<\/p>\n

Crank up the heat<\/h3>\n

Once you’ve isolated your most power-consumptive servers, turn up the thermostat on the rest of them.\u00a0 Most servers can operate perfectly well at temperatures of as much as 100\u00b0 (be sure to check with your supplier before trying that, though) and each 1\u00b0 increase in temperature can save about 4% in energy costs, according to Sun\u2019s Monroe.<\/p>\n

You should also become familiar with the EPA\u2019s Energy Star initiative<\/a>. This program sets standards for efficient energy use and publishes lists of products that meet them.\u00a0 Needless to say, computers are a major Energy Star focus. Did you know, for example, the EPA estimates that enabling basic power management features that come with the Windows operating system can save up to $75 per computer per year? While there are legitimate reasons to leave PCs on all night at times, simple open source network tools can enable systems managers to shut down unused computers and still have the flexibility to power them on when needed. The Energy Star website has a list of software tools for remote power management<\/a> as well as a power management savings calculator<\/a>.<\/p>\n

A somewhat more radical option is to outsource all or part of the data center.\u00a0 While there are many factors involved in this decision, the potential energy savings of such a move shouldn’t be underestimated.\u00a0 In the case of total data center outsourcing, contractors should be able to provide you with power savings estimates to factor into your calculations.\u00a0 Amazon\u2019s S3 storage service<\/a> is one of many specialized offerings that are emerging. Amazon sells cheap off-site data storage. One of its appeals is that users don’t need to pay for — and cool — on-site storage area networks.<\/p>\n

Most technology vendors now have green initiatives, and you should become familiar with what your key vendors are doing. For example, IBM has made its own IT operations a showcase of energy efficiency. In the course of consolidating 155 data centers worldwide down to just seven, it\u2019s cut operational costs by $1.5 billion. This podcast tells more<\/a>.<\/p>\n

What are you doing to save energy in your data center? Write your suggestions in the comments are below.<\/p>\n","protected":false},"excerpt":{"rendered":"

From Innovations, a website published by Ziff-Davis Enterprise from mid-2006 to mid-2009. Reprinted by permission. The EPA estimates that data centers eat up about 1.5% of all electricity in the United States and that nearly a quarter of that power … Continue reading →<\/span><\/a><\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"spay_email":""},"categories":[143],"tags":[159,206,207,208],"jetpack_featured_media_url":"","jetpack_shortlink":"https:\/\/wp.me\/pTy95-lo","_links":{"self":[{"href":"https:\/\/gillin.com\/blog\/wp-json\/wp\/v2\/posts\/1326"}],"collection":[{"href":"https:\/\/gillin.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/gillin.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/gillin.com\/blog\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/gillin.com\/blog\/wp-json\/wp\/v2\/comments?post=1326"}],"version-history":[{"count":6,"href":"https:\/\/gillin.com\/blog\/wp-json\/wp\/v2\/posts\/1326\/revisions"}],"predecessor-version":[{"id":1710,"href":"https:\/\/gillin.com\/blog\/wp-json\/wp\/v2\/posts\/1326\/revisions\/1710"}],"wp:attachment":[{"href":"https:\/\/gillin.com\/blog\/wp-json\/wp\/v2\/media?parent=1326"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/gillin.com\/blog\/wp-json\/wp\/v2\/categories?post=1326"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/gillin.com\/blog\/wp-json\/wp\/v2\/tags?post=1326"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}